15% LEO/MIL discount with proof of service


Competition Plate Rack

The new Red Stitch Tactical Competiton Plate Rack is a one of a kind innvovation in plate rack design. Most plate racks allow the shooter to engage the targets in one orientation; you could either buy a rack that shoots to the front or buy a rack they lets you shoot the target plates in line. Our new rack allows you to choose which orientation to engage the targets. Frontal, 45 degrees or in line. From a competition stage design point of view this gives you incredible flexibility and allows you to design stages in a manner not before available.

Each target assembly rotates independantly and is secured in the desired orientation with a set bolt. Each assembly also has its own independant tilt adjustment and plate stop which protects the target assemblies behind it when shot in line. Targets are 14" on center when enganged from the front and can be reset with a reset lever that is protected behind the standard AR500 deflector shield. Most manufacturers make their plate racks with cold rolled steel as the deflector and expect you to pay several hundred dollars extra for an armored shield. We build ours with the AR500 shield from the begining.

As this was designed with competiton stage use as a focus, the rest lever is only used when firing in the frontal position as a standard plate rack. When engaged form 45 degrees or in line, or any combination of different directions, manual reset is the idea.

SPECIFICATIONS:

8" TARGET PLATES 14" ON CENTER

THREE ENGAGMENT ORIENTATION OPTIONS

AR500 FRONT AND SIDE DEFLECTORS

RESET BAR FOR FRONTAL ENGAGEMENT

INDEPENDANT TARGET ASSEMBLIES WITH TILT ADJUSTMENT

HEAVY 3" ANGLE AND CHANNEL LEG ASSEMBLIES

RST-6814-CPR  $1450.00

 

 

 


 

Standard Plate Rack

Our new Standard Plate Rack has been completely redesigned to increase strength and versitility. Built on the same design as the new Competition plate rack, the standard rack is available in 12" or 14" on center targets, and uses stronger and more stable legs. we still incorporate an AR500 sheild built in so you dont have to pay several hundred dollars extra to have your rack armored.

Once person can still assemble the rack by themselves buyt it is now heavier and stronger so it will require more strangth to stand it up alone. Be smart, get a buddy to help ;)

Target plates are available in 12” or 14" on center and use the same 3/4” solid steel bar hinge assembly as our dueling trees and precision sniper targets. Each plate has its own tilt adjust screw to allow you to fine tune each plate individually to allow for more or less angle on the plates.

3/8" Angle Iron legs bolt to heavy channel feet for strength and stability. Bolt down holes in the feet to stake in the ground if you want it mobile.

Total weight of the system assembles is approx 250lbs. While it breaks down into 4 main parts very easily it must be shipped freight, so consider this when ordering.

- SPECIFICATIONS -

8” Round AR500 Target plates
Target plates 12” or 14" on center
AR500 Front deflector shield standard
Heavy Anglelegs with Channel Feet
1” Solid Steel Reset Bar

Removable target hinge assemblies
1 Person set up

RST-6812-SPR  -  $999.00

RST-6814-SPR - $1250.00